Proxer12-HF-U dektop proximity reader 13,56 MHz Mifare,iClass,Legic,NFC, USB 1910-17_R4

This product has been discontinued. Its data is still reachable on our site for support purposes. Please find its replacement product in Recommended products section below.

Brief description

Proxer12 is an enhanced version of the highly successful Proxer7 reader.

The Proxer12 is a proximity card reader for reading RFID cards and transponders (transducers of various shapes such as bracelets or keychains). Proxer12 allows secure and easy identification e.g. in the identification of access cards, passes, authorization or point collection systems.

With the HF and FF types, a member of the new student card, the National Unified Card System (NEK), can also be read.

The Proxer12-FF (full frequency), also known as ALL READER, or multiclass reader, reads most of the RFID standards used in Hungary.

The Proxer22 is an exclusive elegant, glass-fronted wall version of the Proxer12, with exactly the same knowledge and functionality, with the same options and subtypes.

The Procontrol Proxer product family can be ordered with either an IoT reader with an Ethernet interface or an RS485 reader with wiegand output (Proxer22). In addition to reading RF, smart cards and smart cards, the Proxer52 is also a product suitable for data collection and control.

Proxer12 is an enhanced version of the highly successful Proxer7 reader.
Additional features of the Proxer12 (1910-17_R3) reader compared to the Proxer7 (1616-14_R6) reader- Tech release 03/12/2020:
• Better quality, more reliable scanning for all card types
• Enhanced read compatibility: iCode 2, iCode SLI, FDX Animal, Felica, TagIt Plus 3P read
• 125kHz transmitters, longer reading distance for Indala
• Improved Indala, KSF and Type2 handling
• New CardReaderManager is a modern, user-friendly utility with many new features
• The format of the desired data output can be set by the user: decimal, hex, shift, facility code, prefix, spec. insert characters, enter, etc.
• Setting a custom data output does not require a firmware change
• Wiegand waveform can be modified
• For multiclass cards, you can read (narrow down) data from both chips at the same time
• For Proxer12 and Proxer22 (1910 _R4 and 2027_R3), a 5V Wiegand interface voltage can already be selected.
May 20, 2021: IoProx XSF read - starting with firmware version b0013
• The repertoire has been expanded with the ability to read IoProx XSF cards.

Properties

• RFID proximity / smart card reader
• Card for reading an RFID transmitter (tag)
• To detect permanent card presence
• Desktop reader versions with USB and RS232 connectors
• Optionally RS485, Wiegand resp. An IoT reader with Ethernet output is available
• Changeable USB serial port / keyboard emulation
• 125/134 kHz and / or 13.56 MHz RFID transmitters for mobile phones with NFC module (dual-frequency multiclass reader)
• User-customizable, parameterizable properties
• Extensive integration
• LED multicolor light and various beeps
• Product with MABISZ (Association of Hungarian Insurers) recommendation
• Table design size: 79 x 117 x 24mm
• Indoor table, optionally wall outdoor (-EXT), -OEM can be built in and even available with acid-resistant, alkali-resistant housing (-S)

Package contains

• For Proxer12-OEM reader: Proxer12 OEM electronics, without housing
• For Proxer12 (USB) reader: Proxer12 (USB) reader 1.8m USB A - micro B cable
• For Proxer12 (RS232) reader: Proxer12 (RS232) reader 2m RS232 serial cable plug power supply
• For Proxer22 (Wiegand and RS485 or Ethernet IoT) reader: Proxer22 (RS485) indoor wall reader 1m patch cable
• Documentation and installation CD / download: CardReaderManager program (card number display, listing, parameter setting software), driver, and a sample program showing a simple API for a C # development environment, with which you can adapt it to your own software application, e.g. user for authentication purposes.

Mentés

Technical Description

The package includes a driver at a basic price and a sample program showing a simple API for the C # development environment, with which Proxer12 can be adapted to its own software application, e.g. for user authentication purposes. If required, we also provide utilities e.g. card UID is automatically copied to the clipboard during scanning. The firmware package can be downloaded from the Firmware Package link in the Support box on the right.

Types

The Proxer12 is available in different types, depending on whether you are using a low or high frequency RFID transmitter. The HF in the product code indicates the high frequency (13.56 MHz), while the LF indicates the low frequency (125/134 kHz). The FF product can receive both high and low frequency transmitters.

See the product data sheet for a detailed type table.

LF (low frequency), ie types excited at low frequency (125 / 134kHz):
• Emarine (eg EM4100,4102,4200)
• Casi Rusco
• FDX Animal
• HiTag1
• HiTag2
• Indala Type1
• Indala Type2
• Indala KSF (Kantech Secure Format)
• IoProx XSF (Kantech Extended Secure Format)
• ProxCard II
• ProxCard II C1000
• ProxCard II H10301
• ProxCard II H10302
• ProxCard II H10304
• TIRIS
• T5557, ATA5567, ATA5577



HF (high frequency, ie types excited at high frequency (13.56MHz)):
Transmitters type ISO-14443A
• Mifare Classic 1K, 4K
• Mifare Ultralight
• Mifare Desfire
• Mifare Plus, Mifare Plus X
• Mifare ProX, Mifare SmartMX
• SLE66R35

Transmitters type ISO-15693
• Texas Instruments TagIt Plus
• Texas Instruments TagIt Plus 3P
• Texas Instruments TagIt Standard
• Texas Instruments TagIt Pro
• Legic Advant
• Picopass
• HID iClass
• ICode SLI, ICode 2

Transmitters type ISO-14443B
• SRIXXX, pl. SRI512, SRT512, SRI4K, SRIX4k
• ISO-14443B type card emulation
• Felica

ISO-18092 / NFC type communication
• P2P active communication according to NFCIP-1
• NFC card emulation (passive)
• Mobile phone with NFC function (Android, iOS, Windows Mobile) in the modes listed above


The product marked FF (full frequency) is multiclass, ie it can read both low (LF) and high frequency (HF) encoders.


If you do not have accurate technical information about your existing card, contact our specialists and send a sample card!
Mifare Plus X, Mifare Desfire, Legic, HID iClass, HID Seos-E (Elite), Indala KSF, IoProx XSF, etc. cards typically contain encryption, unique number encoding. In the case of a reader / card order, knowledge of the encryption key is absolutely necessary for the satisfactory fulfillment of the demand, and the provision of the solution may require engineering development work even with the encryption key, we offer the tools at a unique price.

The product is able to connect to various interfaces, which is also indicated by the product code: U-micro USB connector, 232-RS232, W4-RS485 and Wiegand.

Proxer12-LF-U
Proxer12-HF-U
Proxer12-FF-U
Proxer12-LF-232
Proxer12-HF-232
Proxer12-FF-232
Proxer12-LF-W4 (RS485 and Wiegand)
Proxer12-HF-W4 (RS485 and Wiegand)
Proxer12-FF-W4 (RS485 and Wiegand)
Proxer12-T-EM-485STP

Options

• -CH: Card pocket on the front panel
• Default desktop instead of wall indoor (Proxer22), wall outdoor (Proxer22-EXT) or even -S acid-proof housing
• -OEM built-in version
• Front panel for OEM version, portrait or landscape design, two sizes (60x101mm, 71x127mm)
• 1712-15-28 Proxer7 ALL Reader reader front black, portrait design, 71x127x6mm, for OEM built-in version (eg for Keysafe)
• 1934-18-02 Proxer7 reader front panel, black, portrait design, 60x101x7mm, for OEM built-in version (eg for AutoPay, PayGate)
• 304255 Plug power supply
• 807572 Cable, passive Poe set
• Cross cable
• Special OTG cable: micro USB - with micro USB connectors, OTG cable, 15cm

Functions

• Continental Automotive Hungary Kft: "At the end of the testing period, there was a completely positive image of the Proxer7 product and Procontrol support. I will indicate to our programmers that they are a very usable tool that can easily interact with programming environments."
• Using an RFID card as a hardware key, where a particular computer application only runs as long as the authorized card is in the reader.
• For PLCs
• Program protection system: only authorized users can access the programs / trigger a password
• Machine protection system: only authorized users can access the machine
• Network security system: only authorized users can access the network
• Service protection system: only authorized users can access the service
• Personal access control system
• Time and attendance system
• Wellness - fitness - at the spa access system for ticket identification and cashless payment
• Other device authorization, access authorization systems
• To trigger a login password
• From a coffee machine, a vending machine for card purchases
• OEM systems
• For developers to identify RFID standard
• RS232 types are recommended for ARM connection. On an ARM device, it is extremely easy to use because a simple 10-digit decimal card number arrives on the serial line and a line feed.